Best Pump For Aeroponics: Top Choices in 2024

Updated on:
Equipment, Systems

Some of the links on this page are affiliate links, meaning, at no additional cost to you, I will earn a commission if you click through and make a purchase. This way I can continue to produce high-quality content and keep this site running.

Aeroponics is a cutting-edge method of growing plants without soil, using a nutrient-rich mist to deliver essential nutrients directly to the plants’ roots. This method allows for faster growth, higher yields, and better control over pests and diseases, making it an attractive option for urban farmers and hobby enthusiasts alike. To facilitate the smooth operation of an aeroponic system, the use of a reliable and efficient pump is crucial.

In an aeroponic setup, the pump is responsible for delivering the nutrient-rich solution to the plants’ roots in the form of a fine mist. The best pump for aeroponics will ensure consistent nutrient delivery and maintain the ideal balance of oxygen and moisture in the root zone, allowing the plants to absorb nutrients more efficiently.

Best Pump For Aeroponics

When selecting the best pump for an aeroponic system, critical factors to consider include the size of your system, flow rate, and pressure capabilities. The size and design of your aeroponic setup will determine the required flow rate and pressure, making sure that the nutrient solution is distributed evenly across the root zone. Additionally, it’s essential to select a pump with a high-quality build, ensuring a longer lifespan and consistent performance.

Armed with the knowledge of what makes a great pump for aeroponics, we put numerous pumps to the test, focusing on their efficiency, durability, and performance. After countless hours of research and hands-on trials, we’re excited to share our insights on the top contenders that will help you get the most out of your aeroponic system.

Our Picks for Best Aeroponics Pump

Best budget pick: VIVOSUN 800GPH Submersible Pump
Best low to moderate pressure pump: SEAFLO 33-Series Industrial Water Pressure Pump
Best for large aeroponic systems: VIVOSUN 2700 GPH Submersible Water Pump

Best Pumps for Aeroponics

We’ve researched and compiled a list of the best pumps for aeroponics to help you achieve optimal results in your indoor gardening adventures. Check them out below!

VIVOSUN 800GPH Submersible Pump

VIVOSUN 800GPH Submersible Pump

  • Compact Size & Easy Control: Measuring 4.1 * 2.6 * 3.5 inches with a 6.5 ft power cord for hassle-free installation. Adjust water flow and pressure, up to 800 GPH and 10 ft lift height, using the knob; operates at 24W and 110-120V.
  • Simple Maintenance: A small but mighty water pump, easy to conceal and no tools needed for disassembly or cleaning.
  • Versatile Placement: Can be placed flat, angled, or vertical – simply adjust it to your requirement.
  • Broad Applications: High-efficiency design suitable for various environments like ponds, fountains, waterfalls, hydroponic systems, irrigation systems etc.; functional at temperatures from 32℉ to 104℉.
  • 3 Outlet Adapters: Comes with nozzles of three diameters – 0.51 in., 0.62 in., and 0.74 in., for varied water flow effects as per your needs.
View On Amazon

We highly recommend the VIVOSUN 800GPH Submersible Pump for its performance, versatility, and user-friendly features.

  • Powerful with max flow rate 800 GPH
  • Easy to clean and maintain
  • Adjustable water flow and multi-angle placement options
  • A bit loud for some users
  • Short power cord for pond usage
  • Impeller may require regular attention

Having just used the VIVOSUN 800GPH Submersible Pump, the first thing we were impressed by was its powerful performance. The pump does live up to its claim of 800 gallons per hour, which makes it an excellent choice for aeroponics or any other type of hydroponics. It runs smoothly, ensuring your plants or fish are well supplied with oxygen and nutrients.

The pump is easy to clean, with a detachable design that requires no tools for disassembly. This is particularly important, as regular cleaning ensures the longevity of the pump. An adjustable knob allows for control over the water flow rate and pressure, allowing customization according to your specific needs. The pump can be placed in different positions, such as flat on its base or at various angles.

However, there are a few drawbacks to consider. Some users have reported that the pump can be a bit loud, especially when placed in smaller or enclosed spaces. If noise is a concern for you, it’s something to keep in mind. Additionally, the power cord is relatively short, which can be a limitation for pond usage. You may need an extension cord to address this issue. Lastly, the impeller might require attention due to occasional loosening or damage.

In conclusion, the VIVOSUN 800GPH Submersible Pump delivers impressive performance for various applications such as aeroponics, hydroponics, or aquarium use. Its easy-to-clean design, adjustable flow rate, and multi-angle placement options make it a user-friendly choice. Despite a few minor drawbacks like noise and power cord length, we believe this pump is a valuable addition to any setup.

SEAFLO 33-Series Industrial Water Pressure Pump

SEAFLO 33-Series Industrial Water Pressure Pump

  • Offers high water flow and moderate pressure with a flow capacity of 3.3 GPM
  • Runs on a standard wall outlet using an installed power plug, drawing a current of .75 amps (max 1.2 amps) for energy efficiency
  • Built-in adjustable pressure switch automatically activates or deactivates at 45 PSI for automated control
  • Self-primes up to six vertical feet, capable of operating dry without damage, ensuring long-lasting usage
  • Easy installation, servicing, and winterization processes for user convenience
  • Comes with a 4-year warranty for peace of mind
  • Quiet operation maintaining a tranquil environment
  • Incorporates low amp draw demand pump complying with industry-standard mount pattern
  • Equipped with built-in check valve and thermal protection for safety
  • Enables effortless connection through easy connect fitting.
View On Amazon

The SEAFLO 33-Series Industrial Water Pressure Pump would work well for a small horizontal aeroponic setup or a 6-foot aeroponic tower.

  • Good flow capacity and automated control at 45 PSI
  • Easy installation & servicing
  • Energy-efficient and quiet operation
  • Potential leakage issues
  • Not suitable for outdoor use in harsh climates
  • Absence of any additional hose

The SEAFLO 33-Series Industrial Water Pressure Pump stood out to us as a potential game changer in our garden. After extensively testing it, here’s our take on this product.

First off, the water flow capacity of 3.3 GPM coupled with moderate pressure makes this pump stand out from its competitors. This feature ensures that your plants will receive abundant water and necessary nutrients without getting overwhelmed by excessive pressure.

One feature to appreciate is the built-in adjustable pressure switch which activates at 45 PSI automatically – no need to fumble around manually switching it on and off. Just plug it in and let the pump handle the rest! It also self-primes up to six vertical feet which is quite good.

The convenience of installation and servicing provided by the SEAFLO 33-Series cannot be understated! Plug into any standard wall outlet and you’re set. With an amp draw of .75 amps (max of 1.2 amps), you can enjoy energy efficiency while maintaining a tranquil environment due to its quiet operation.

Let me tell you about durability – capable of operating dry without damage, it reassures long-lasting usage and demonstrates reliability. Feeling safe also plays a vital role when dealing with electrical devices near water, so having built-in check valve and thermal protection are key features for us.

However, every rose has its thorns – there are some areas where improvements could be made. It seems like leaks are a common issue with this model, especially at the head gaskets according to several users’ experiences. I myself ran into this problem after using it for a few months although it didn’t affect the pump’s overall functionality but was certainly inconvenient given occasional puddles in my greenhouse.

Another point worth noting is that this pump may not withstand harsh weather conditions if left outdoors all year round as it seems to be prone to rusting in certain parts – an important consideration based on your location or setup.

Despite these minor setbacks, we believe this SEAFLO 33-Series pump comes packed with enough beneficial features to offset these issues – plus who can argue with a 4-year warranty? However, it might not fit everyone’s needs perfectly depending upon their specific requirements or setup.

VIVOSUN 2700 GPH Submersible Water Pump

VIVOSUN 2700 GPH Submersible Water Pump

  • Robust and Durable: Constructed with silicon carbide material for enhanced attrition resistance and durability, it’s completely waterproof (IPX8) with overload protection.
  • Energy-Efficient & Quiet: Operates quietly (30-40 dB) and consumes less energy (120W) while delivering a high output (2700GPH/10000LPH), perfect for 420-gallon ponds.
  • High Lift & Removable Filter: Offers up to 15ft/4.5m lift, equipped with an easy-carry handle and detachable filter.
  • Easy Setup: Features an adjustable outlet direction, a lengthy 20.3 ft power cord, and flexible tube size (1” or 1-1/4”) compatible with various filter systems.
  • Versatile Use: The VIVOSUN Fixed Flow Rate pump can function as either submersible or inline.
View On Amazon

We recommend the VIVOSUN 2700 GPH Submersible Water Pump for its impressive performance, energy efficiency, and versatility.

  • Solid construction and overload protection
  • Energy saving with low noise
  • High lift with detachable filter
  • No included adapter for common tubing sizes
  • Requires some customizations for certain setups
  • Limited information available on specs

Upon setting up our aeroponics system, we were thrilled with the features and characteristics of the VIVOSUN 2700 GPH Submersible Water Pump. The solid construction and silicon carbide materials in the shaft and drive ring ensure a longer service life and reliable performance. Additionally, we appreciated the IPX8 waterproof rating and built-in overload protection, which provided peace of mind for continuous use.

Operating the pump was an enjoyable experience, thanks to the ultra-quiet design producing minimal noise at 30-40 dB. The energy efficiency was another aspect we welcomed, as the 120W pump provided an outstanding output of 2700 GPH while consuming less power compared to other pumps on the market. This feature made it a cost-effective option for our 420-gallon pond setup.

The high 15ft lift and detachable filter were also notable features. We found it easy to accommodate our water features and maintain proper filtration. However, we did face a minor challenge with finding a suitable adapter for the tubing, as the required size wasn’t a common one, and no adapter was included in the package. We eventually managed to find a solution, but an included adapter would have been more convenient.

Furthermore, we found a lack of readily available information on the product specifications. Though this didn’t affect our overall experience with the pump, having access to a detailed spec sheet would have been helpful.

Overall, the VIVOSUN 2700 GPH Submersible Water Pump is a reliable, quiet, and energy-efficient option for aeroponics and pond use, despite its minor drawbacks.

Aquatec 8800 series 8852 water pressure boost pump

Aquatec 8800 Series 8852 Water Pressure Boost Pump

  • 24VAC pump equipped with a 115V 60Hz transformer.
  • Ideal for connecting to misting nozzles or RO water systems.
  • For high-pressure performance, position the pump on the floor with the water supply tank at a higher level.
  • Equipped with an internal bypass in the pump head; when used with a closed-loop high-pressure system or downstream pressure tank, a check valve is necessary to prevent backward water flow and maintain above 80 psi.
  • Wet-tested for guaranteed performance upon arrival.
  • The pressure switch and solenoid valve are not included but can be purchased separately.
  • The output should connect to either a misting nozzle or an RO system that is 150GPD or less to boost water pressure effectively.
  • There will be no pressure boost if the output isn’t connected.
  • The pump doesn’t shut off automatically; manual control switch is required for automatic operation – either a pressure switch or timer switch depending on your preference.
View On Amazon

A versatile and reliable pump for aeroponics and RO systems, boosting water pressure effectively.

  • Efficient pressure boosting for aeroponics and RO systems
  • Comes with a heavy-duty 3 Amp transformer
  • Durable, steel material for long-lasting use
  • Can be loud during operation
  • Pressure adjustment instructions not clear
  • Lower pressure limit set at 75 PSI

We recently used the Aquatec 8800 Series 8852 Water Pressure Boost Pump and found it to be a great choice for both aeroponics and RO systems up to 200 GPD. The pump effectively boosted water pressure and, combined with the heavy-duty 3 Amp transformer, allowed for efficient and consistent performance.

While using the pump, we noticed it could be a bit noisy during operation. This may not be a significant issue if you have a separate grow room, but it’s worth considering if noise is a concern. Additionally, the instructions provided for pressure adjustment were not as clear as we would have liked. However, with a bit of research, we managed to figure it out and adjust the pressure accordingly.

One limitation to note is that the lower pressure limit is set at 75 PSI. This is suitable for our use with a Dow Filmtec membrane, but it may not be ideal for all users.

Overall, the Aquatec 8800 Series 8852 Water Pressure Boost Pump is a reliable and versatile pump that delivers efficient performance for aeroponics and RO systems. Despite its minor drawbacks, we believe it’s an excellent investment for those seeking a high-quality pump to boost their water pressure.

Tyenaza Water Pump Boost - Aeroponics Misting System

Tyenaza Water Pump Boost – Aeroponics Misting System

  • Compact yet powerful JT-750D4 pump
  • Energy-efficient design
  • Ideal for aeroponics, hydroponics, and misting applications
  • High-quality construction assures longevity
  • Pressure switch and solenoid valve are available separately
  • Low-noise, easy-to-install adjustable pump
  • Rubber base decreases noise levels further
  • Suitable for both freshwater and saltwater use
  • Brushless Motor, Voltage: 12V (starts at 6V)
  • Flow rate: 700L/H, Hydraulic Head: 5M, Noise level: <35DB
  • Temperature range: -40℃ ~100℃
  • Thread Caliber: 20mm, Weight: Approx. 260g /9.2oz.
View On Amazon

If you’re looking for an efficient and reliable pump for your aeroponics system, this Tyenaza pump is definitely worth considering.

  • Compact design with powerful performance
  • Durable and long-lasting
  • Suitable for fresh water and seawater applications
  • Needs to be primed for operation
  • Pressure switch and solenoid valve sold separately
  • Does not come with batteries

We recently set up our own aeroponic system and decided to give the Tyenaza Water Pump Boost a try. First things first, we loved its compact design and how easy it was to install. The pump is truly small but mighty, providing excellent water flow while being energy-efficient.

Another aspect we appreciated was the pump’s versatility. The Tyenaza pump can be used with both fresh water and seawater, which is great if you are working with different types of plants or growing requirements.

However, there are a few things that could be improved. For instance, the pump needs to be primed to function properly. It took us a while to figure this out, but once we located the pump slightly below the tank’s level, it primed itself like other centrifugal pumps. Just be aware of this when setting up the pump in your system.

Also, note that the pressure switch and solenoid valve are not included in the package and have to be purchased separately. We found this a bit inconvenient, as we expected a complete package.

Despite these minor drawbacks, we would still recommend the Tyenaza Water Pump Boost for aeroponic enthusiasts looking for a reliable, powerful, and easy-to-install pump.

q? encoding=UTF8&ASIN=B00OL1X5KG&Format= SL400 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=hydroponichorizons 20&language=en US

Danner Manufacturing, Inc. Supreme Aeroponics 155 GPH Cloning Pump with Spray Head

  • A water spray function designed to constantly mist cuttings for optimal root growth.
  • The ability to cover a large area, spraying water 24” – 30” in diameter.
  • Versatility in use; it fits perfectly into a 5-gallon bucket system with single pump setup or can be part of a larger multi-pump system.
  • An impressive maximum flow rate of 155 GPH while only consuming 14 Watts.
  • Comes with a lengthy 6’ power cord for easy placement.
  • Assurance of quality as the pump is certified.
View On Amazon

Choose this compact pump with an efficient spray head if you’re serious about cloning/rooting cuttings with success.

  • Compact design with dynamic spray head
  • Provides continuous misting for optimal root growth
  • Can be used in varied system sizes
  • May require more pumps for larger systems
  • Maximum flow rate limited to 155 GPH
  • Power cord with only 6 feet length

We recently used the Danner Manufacturing Supreme Aeroponics 155 GPH Cloning Pump with Spray Head and found it quite effective for cloning and rooting cuttings. The compact design and spray head feature ensured that cuttings were constantly misted, promoting excellent root growth. The pump was able to spray water 24”- 30” in diameter, which is quite impressive for its size.

What we really appreciated about this pump was its versatility. The pump can be used in a simple 5-gallon bucket system (utilizing just the one cloning pump) or installed in a larger system requiring multiple pumps. This adaptability makes it suitable for a variety of aeroponics setups and users with different requirements.

However, we noticed that for larger systems, adding more pumps might be necessary. Nonetheless, this is a minor drawback considering the pump’s effectiveness and versatility. Additionally, with the maximum flow rate capped at 155 GPH and a power cord length of only 6 feet, users might need to plan their setups accordingly to accommodate these limitations.

Overall, our experience with the Danner Supreme Aeroponics 155 GPH Cloning Pump was rewarding. With great misting performance and adaptability to various system sizes, this pump has the potential to fit many aeroponics gardeners’ diverse needs.

Buying Guide

Whether you’re setting up a horizontal DIY aeroponic system or a vertical DIY aeroponic tower system, when it comes to choosing the best pump for aeroponics, there are a few key factors to consider. Here, we’ll outline these factors to help you make an informed decision.

Water Pressure and Flow Rate: The amount of water pressure and flow rate of the pump greatly affect the overall performance of your aeroponic system. Ideally, we would want a pump with consistent water pressure and suitable flow rate to ensure nutrients and oxygen are distributed evenly to the roots of your plants.

For a low pressure aeroponics pump, it’s generally recommended to aim for a pump that can deliver at least 20-30 gallons per hour (GPH).

The best pump for high pressure aeroponics should be able to generate pressures around 80-100 PSI (pounds per square inch). This is essential in creating the fine mist needed in high pressure aeroponics for optimal nutrient absorption by plant roots.

Reliability and Consistency: Whether it’s aeroponic gardening at home or in a commercial setting, consistency is key, as maintaining exact conditions can affect the plant growth significantly. The pump needs to reliably maintain its set pressure range without deviations.

Energy Efficiency: As aeroponic systems run continuously, it’s essential to find a pump that doesn’t consume too much power. It’s worth looking at energy-efficient models, as they’ll help reduce your electricity bill in the long run.

Noise Level: Nobody wants a noisy pump. Aeroponic systems are often used indoors, so choosing a pump with minimal noise output is essential.

Durability and Reliability: It’s crucial to invest in a pump that is built to last, as it will constantly be exposed to water and nutrients. Opting for a pump with a good reputation for durability and reliability will save you from headaches and expensive replacements down the line.

Cycling Ability: These pumps need to cycle on and off frequently, so check that any given model can handle this without overheating or shortening its lifespan.

Ease of Installation and Maintenance: When setting up an aeroponic system, you’ll want a pump that is easy to install and maintain. Look for models with straightforward installation processes and clear instructions, as well as those that require minimal ongoing maintenance.

Ability to Pair with Additional Equipment: High-pressure systems often require additional equipment like pressure tanks and solenoid valves, so ensure your chosen pump is compatible with these components.

By considering these factors, you can be sure to choose the perfect pump for your aeroponic system, ensuring the best growing conditions for your plants.

Buying Guide

Claudia Lewis
About the author

I’m Claudia, a hydroponic gardening enthusiast with years of experience in this exciting and rewarding hobby. Over the years, I’ve experimented with different hydroponic systems, nutrient solutions, and plant varieties. 

On this website, I share everything I know about growing plants without soil. You’ll find everything you need to know to start your own hydroponic garden, from choosing the right system to selecting the best plants and nutrients.